Home >
Products >
Geotextile >
Polyester/Polypropylene Filament Spunbonded Nonwoven Geotextile for Filtration, Isolation, Reinformcement
Polyester/Polypropylene Filament Spunbonded Nonwoven Geotextile For Filtration, Isolation, Reinformcement
Features & benefits
- Mass per unit areas range from 100g to 800g/m2 to guarantee an available product for every application (heavier products may be available by special order)
- Superior chemical resistance in even the most aggressive environmental applications
- Continuous long fibers needle punched together to form a sturdy fabric capable of withstanding construction installation stresses
- Contains additives for maximum UV resistance
Description:
Production Description:
Filament needle punched nonwoven geotextile using all new polyester resin spunbonded continuous filament needle punched geotextiles are manufactured by the extrusion of fibers which are then laid down on a manufacturing "bed" and then needle punched from both top and bottom to entangle the fibers to produce a dimensionally stable geotextile.
Filament needle punched nonwoven geotextile using all new polyester resin spunbonded continuous filament needle punched geotextiles are manufactured by the extrusion of fibers which are then laid down on a manufacturing "bed" and then needle punched from both top and bottom to entangle the fibers to produce a dimensionally stable geotextile.
Detailded informations:
1)anti-aging, the product has very high anti-ultraviolet radiation ability, not easy to degradation.
2) High temperature resistance to up to 230ºC maintaining structure stability and original physical properties.3) High flat drainage and vertical permeability.
4) High creep resistance.
5) Resistance of erosion of chemicals in soil as well as the corrosion of gasoline and diesel etc.
6) High elongation under certain stress, thus able to adapt to uneven and irregular bases.
Product Parameters:
|
Non-woven Geotextile Technical Parameter (GB standard)
|
|||||||||
|
Item
|
unit
|
Standard Specification
|
|||||||
|
100
|
150
|
200
|
250
|
300
|
350
|
400
|
450
|
||
|
Thickness≥
|
mm
|
0.9
|
1.3
|
1.7
|
2.1
|
2.4
|
2.7
|
3
|
3.3
|
|
width Deciation
|
%
|
0.5
|
|||||||
|
Breaking strength
|
KN/M
|
2.50
|
4.50
|
6.50
|
8.00
|
9.50
|
11.00
|
12.50
|
14.00
|
|
Breaking Elongation
|
%
|
25-100
|
|||||||
|
Weight Tolerance
|
g/m²
|
-8
|
-8
|
-8
|
-8
|
-7
|
-7
|
-7
|
-7
|
|
CBR Tear Strength≥
|
KN
|
0.3
|
0.6
|
0.9
|
1.2
|
1.5
|
1.8
|
2.1
|
2.4
|
|
Tear Strength≥
|
KN
|
0.08
|
0.12
|
0.16
|
0.2
|
0.24
|
0.28
|
0.33
|
0.38
|
|
Vertical Permeability
|
N/5cm
|
Kx(10-¹-10-³)
|
|||||||
|
EOS 090
|
mm
|
0.07-0.2
|
|||||||
Applications of Geotextiles
1. Drainage
Geotextiles will efficiently collect surplus water from structures, such as rainwater or surplus water, from the soil and
discharge it.
2. Filtration
Our geotextiles provide superior hydraulic flow and soil retention, which makes them well suited for filtration in subsurface
drainage applications and under hard armour systems.
3. Separation
Geotextiles are used for paved and unpaved roads, where ground conditions have been compromised. As a separation layer,geotextiles can aid preventing the intermixing of dissimilar materials, add to the performance life of the road and reduce the overall thickness of the road section by requiring less aggregate during construction.
4. Reinforcement
High strength geotextiles can be used to reinforce earth structures as the strength of the tape or filament within the fabric
maybe increased to suit a specific application. Thanks to their high tensile strength they are an ideal reinforcement solution.
5. Protection
Due to the consistent thickness and weight of our Geotextiles, they provide adequate cushioning and protection for critical lining systems.
FAQ
Q1: Are you a factory or trading company? Where is your company located?
A1: We are a manufacturer/factory. Our company is located in Shandong, China.
Q2: How do you ensure the quality?
A2: We are working with three QC processes to guarantee the quality:
1 .For raw materials;
2.Onsite inspection during production;
3.Final QC test for each batch of finished products.
Q3: OEM OR ODM accepted?
A3: We can produce the geotextile as per customer's technical requirements.
Q4:How to get the sample?
Q4:How to get the sample?
A4: We can provide you samples for quality inspection. According to our company policy, samples are free,
we only charge the freight fee. The freight fee will be returned If you place the order.
we only charge the freight fee. The freight fee will be returned If you place the order.
Q5: What's your MOQ? Can I order small quantity for testing at first order?
A5: For new client, we accept small order for building mutual trust and long-term business relationship.
Q6: How many days will samples be finished? And how about the mass production?
A6: Generally prompt delivery for samples. The leading time of mass production will depend on the quantity.
Q7: What's the payment method you accept?
A7: T/T, L/C,D/P etc.
Q8: Can I visit your company?
A8: Welcome to visit our factory and it is our great pleasure.
Professional geosynthetics manufacturer
Anhui Zhonglu Engineer Materials Co., Ltd
Professional geosynthetics manufacturer
Anhui Zhonglu Engineer Materials Co., Ltd
Angela:86-18095658976
